+62 21 8910 9762 Mon. – Fri. 07:30 – 21:00 GMT +7

Anastasia Lidya Maukar, S.T., M.Sc., M.MT.

Lecturer of Industrial EngineeringAnastasia

Room 315
President University
Jl Ki Hajar Dewantara, Jababeka Education Park
Cikarang, West Java, 17550, Indonesia
Phone: +62 21 8910 9762 – 63 ext. 109
Email: almaukar@president.ac.id, almaukar@gmail.com

Education
MMT in Industrial Management, Technological Institute of Sepuluh November Surabaya (ITS), Surabaya, Indonesia, 2004.
MSc. in Information System Development, University of Hertfordshire, London, United Kingdom/University of Applied Science Arnhem en Nijmegen, Netherlands, 2001.
S.T. in Industrial Engineering, University of Surabaya, Surabaya, Indonesia, 1997.

Publications

Journal Papers
[1] Maukar, A.L., “Aplikasi Penjadwalan Flowshop pada Lantai Produksi : Studi Kasus pada PT XYZ”. Widya Teknik Vol.2 No.2-Nopember 2003. ISSN: 1412-7350.
[2] Maukar, A.L., Dewi, Dian Retno Sari, Siau Wen   “Aplikasi Group Technology untuk Usulan Perbaikan Tata Letak Fasilitas Produksi”. Widya Teknik Vol.3 No.1-April 2004. ISSN: 1412-7350.
[3] Dewi. D.RS., Maukar, A.L., “ Penerapan Algoritma Genetik Penjadualan Produksi Job Shop untuk Meminimumkan Total Biaya Earliness dan Tardiness”. Widya Teknik Vol.3 No.2-Nopember 2004. ISSN: 1412-7350.
[4] Daniyati, L., Maukar, A.L., Sianto, M.E. , “Pengukuran dan Analisis Kualitas Pelayanan Berdasarkan Servqual di Bank XYZ-cabang Surabaya”. Widya Teknik Vol 4. No. 1-April 2005, ISSN: 1412-7350.
[5] Maukar, Anastasia Lidya, Maukar, Sebastian R., Santoso., Anthony (2005): “ A Practical Approach to Implement CRM: A Case Study” . Jurnal Teknologi Industri – Universitas Atma Jaya Yogyakarta, Vol. IX No.4-Oktober 2005. ISSN: 1410-5004.Akreditasi DIRJEN DIKTI No: 23a/DIKTI/Kep/2004.
[6] Soesanto, D.A., Maukar, Anastasia Lidya, dan Sianto, Martinus Edy, (2007), “Perancangan Usulan Tata Letak Gudang Bahan Baku Penunjang di PT. Multi Manao Indonesia”, Widya Teknik, Vol. 6, No.1, April, 2007, ISSN: 1412-7350.
[7] Agustina, Dwi, Maukar, Anastasia Lidya, dan Dewi, Dian Retno Sari, (2007), “Perencanaan Produksi dan Perbaikan Tata Letak di PT. Berkat Anugrah Alam Cemerlang”, Widya Teknik, Vol. 6, No.2, Nopember, 2007, ISSN: 1412-7350.
[8] Purnomo, H.I., Mulyono, Julius dan Maukar, Anastasia Lidya (2008), “Penjadwalan Perbaikan Sistem Produksi di PT. X dengan Memperhatikan Lintasan Perakitan dan Tata Letak Fasilitas”, Widya Teknik, Vol. 7, No.2, Nopember, 2008, ISSN: 1412-7350.
[9] Tanurahardja, Octa Wendy, Dewi, Dian Retno Sari, dan Maukar, Anastasia Lidya (2009), “Penjadwalan Preventive Maintenance di PT. Wahana Lentera Raya”, Widya Teknik, Vol. 8, No.1, April, 2009, ISSN: 1412-7350.
[10] Muriningtyas, Ari, Kuntohasi W., dan Maukar, Anastasia Lidya (2009), “Analisis Potensi Donatur Zakat pada “Rumah Zakat Indonesia” di Surabaya (ditinjau dari pendapatan per bulan calon donator)”, Widya Teknik, Vol. 8, No.2, Nopember, 2009, ISSN: 1412-7350.
[11] Muriningtyas, Ari, Kuntohasi W., dan Maukar, Anastasia Lidya (2009), “Analisis Potensi Donatur Zakat pada “Rumah Zakat Indonesia” di Surabaya (ditinjau dari pendapatan per bulan calon donator)”, Widya Teknik, Vol. 8, No.2, Nopember, 2009, ISSN: 1412-7350.
[12] Permatasari, A.D., Suhartono, dan Maukar, Anastasia Lidya (2009), “Perancangan Tes Pelatihan Basic Shipping di PT. Meratus Line”, Widya Teknik, Vol. 8, No.2, Nopember, 2009, ISSN: 1412-7350.
[13] Maukar, Anastasia L., “Applying Rank Positional Weight Method to Increase Efficiency of the Line Balancing in a Home Theatre Industry”, Spektrum Industri, Vol. 12, No.2, Oktober, 2014, ISSN:1963-6590.
[14] Maukar, Anastasia L., “Implementing Economic Order Interval for Multi Item to Reduce Inventory Cost”, Spektrum Industri, Vol. 12, No.2, Oktober, 2014, ISSN:1963-6590.
 International Conferences
[1] Maukar, Anastasia Lidya dan Dewi. D.RS (2005): “ A Case Study: Resolve Multirow Facility Layout Problems using Genetic Algorithm”. Proceeding of International Conference on Operations and Supply Chain Management, Bali, Indonesia. 15-17 December 2005. ISBN: 979-545-039-5.
[2] Maukar, Anastasia Lidya, dan Dewi, Dian Retno Sari, (2009), “Measuring Logistics Performance (A Case Study at PT. XYZ Cargo, Surabaya, Indonesia “,The 1st International Conference on Logistics and Transport, Chiang Mai, Thailand, 17-19 December 2009. ISBN: 978-974-11-1195-4
[3] Endah, Dini, Wibowo, Antonius, Dewi, Dian Retno Sari dan Maukar, Anastasia Lidya   (2009), “Ant Colony Algorithm for the Vehicle Routing Problem of Mineral Water or Gas Distribution in Indonesia”. The 1st International Conference on Logistics and Transport, Chiang Mai, Thailand, 17-19 December 2009. ISBN: 978-974-11-1195-4
[4] Dewi, Dian Retno Sari, Endah, Dini, dan Maukar, Anastasia Lidya (2009), “Clark Wright Saving Algorithm Model Development for Vehicle Routing Problem with Time Windows”, The 1st International Conference on Logistics and Transport, Chiang Mai, Thailand, 17-19 December 2009. ISBN: 978-974-11-1195-4
[5] Maukar, Anastasia L., Veronica. “Application of Response Surface Methodology of Experimental Designs on Welding Operation Settings to Reduce the Defects of Miniature Circuit Breaker Rating 2 Ampere”, The Proceeding of the 14Th International Conference on Quality in, Mataram, 10-13 August, 2015, ISSN: 114-1284
[6] Andira, Maukar, Anastasia L., Septriana, Tara. “Bubble Defect Reduction using Full Factorial Design of Experiment in Rotocast Area of PT X ”, The Proceeding of the 14Th International Conference on Quality in, Mataram, 10-13 August, 2015, ISSN: 114-1284
 National or Domestic Conferences
[1] Dewi. D.R.S., Maukar, A.L., “ Perancangan Keseimbangan Lintas dan Layout PT. X dengan Mempertimbangkan Ketersediaan Jumlah Operator dan Mesin”. Proceeding Seminar Sistem Produksi VII, ITB, 2005. ISSN: 0854-431X.
[2] Dewi, D.R.S., Maukar, A.L., “ Pengembangan Penjadwalan Job Shop Inserted Idle Time dengan Scheduling Graph untuk Meminimasi Biaya Tardiness dan Earliness”. Prosiding Seminar Nasional Manajemen Teknologi II, ITS, 2005. ISBN: 979-99735-0-3.
[3] Maukar, A.L., Dewi, D.R.S, “Aplikasi Theory of Constraint untuk Alokasi Buffer Lintasan Produksi pada Assembly Manufacturing”. Prosiding Seminar Nasional Manajemen Teknologi II, ITS, 2005. ISBN: 979-99735-0-3.
[4] Maukar, A.L., Kuntohadi, W., “ Faktor-faktor yang Mempengaruhi Keputusan Calon Mahasiswa dalam Pemilihan Perguruan Tinggi Swasta di Surabaya”. Proceeding 3rd National Industrial Engineering Conference, University of Surabaya, 2005. ISSN: 1412-3525.
[5] Sianto, Martinus Edy, Maukar, Anastasia Lidya dan   Soetiono, Hendra 2005): “Analisa Produktifitas Kerja dengan Metode OMAX di PT X”. Prosiding Seminar Nasioanl Manajemen Kualitas ke-5 “ Aplikasi Teknologi Informasi dalam Manajemen Mutu untuk Peningkatan Produktifitas dan Reliabilitas”-Univeritas Trisakti, Sekolah Tinggi Manajemen Industri dan Universitas Gunadarma, 30 Nop-1 Des   2005. SSN: 1907-0101-9-771907-010119.
[6] Dewi. D.RS dan Maukar, Anastasia Lidya (2005): “ Faktor Penentu Kepuasan Pelanggan JasaTelekomunikasi” Prosiding Seminar Nasioanl Manajemen Kualitas ke-5 “ Aplikasi Teknologi Informasi dalam Manajemen Mutu untuk Peningkatan Produktifitas dan Reliabilitas” Univeritas Trisakti, Sekolah Tinggi Manajemen Industri dan Universitas Gunadarma, 30 Nop-1 Des 2005. SSN: 1907-0101-9-771907-010119.
[7] Maukar, Anastasia Lidya dan Dewi. D.RS (2005): “ Perancangan Sistem Informasi Jurusan Teknik Industri Universitas Katolik Widya Mandala Surabaya” Prosiding RAPI Simposium Nasional IV: Rekayasa, Aplikasi dan Perancangan Industri-Fakultas Teknik Universitas Muhammadiyah Surakarta. 3 Desember 2005. ISSN: 1412-9612
[8] Dewi. D.RS, Mulyono, Julius dan Maukar, Anastasia Lidya (2005): ”Simulasi Penentuan Alokasi Buffer di PT Tjakrindo Mas”. Prosiding RAPI Simposium Nasional IV: Rekayasa, Aplikasi dan Perancangan Industri-Fakultas Teknik Universitas Muhammadiyah Surakarta. 3 Desember 2005. ISSN: 1412-9612
[9] Susanto, Yongki, Maukar, Anastasia Lidya, Gunawan, Hendro, “Perancangan On-Line Analytical Processing (OLAP) di UD. MRT”. Proceeding of the 6th National Conference of Design and Application of   Technology 2007. 19 Juli 2007. ISSN: 1412-727X.
[10] Hindarso, H., dan Maukar, A.L.,”Conversion Process of Biomass to Charcoal as a Solid Fuels”, Chemical Engineering National Seminar   Green Technology, Bandung 26 April 2007, Chemical Engineering Department,   Parahyangan Catholic University, Bandung
[11] Maukar, Anastasia Lidya dan Herman Hindarso,”Analisis Kelayakan Pendirian Pabrik Bioarang sebagai Bahan Bakar Alternatif dari Hasil Pirolisis”, Seminar Hasil Penelitian Dosen Muda dan Studi Kajian Wanita 2008 hal 159-165, Surabaya, 16-18 Desember 2008, DP2M-DIKTI, ISBN 978-979-97071-8
[12] Maukar, Anastasia L., Muariawan, Maria, S. “The Implementation of Anthropometry and Ergonomics Principle on Designing Workplace in Final Inspection”, Prosiding Seminar Nasional Teknik Industri 2014, Bukittinggi, 2-4 September 2014, ISBN: 978-602-9081-11-4
[13] Maukar, Anastasia L., Andira, Basri, Jaenudin, “Perancangan Kemasan Karton Box di Unit Packaging , PT XY Indoensia, Cikarang”, Proceeding of   Indonesian Statistical Analyisis Conference 2014, Bandung, 27 Nopember, 2014, ISSN: 2354-6212
[14] Maukar, Anastasia L., Andira, Shodiq. “Pemanfaatan Exhaust Mesin Air Compressor sebagai Energi Alternatif untuk Menjalankan Mesin Tampo Print”,   Proceeding of Indonesian Statistical Analyisis Conference 2014, Bandung, 27 Nopember, 2014, ISSN: 2354-6212
[15] Maukar, Anastasia L., Widaningsih, Ineu, Putra, Andreas Pratama. “Probabilistic Periodic Review System to Determine Minimum and Maximum Inventory Replenishment Levels in ACME Company” National Conference on Applied Research and Technology V in conjunction with Design & Application Technology Conference X 2015, 13-14th August 2015
   
 Non Publication Research
[1] Maukar, Anastasia Lidya, Dewi, D.R.S.: ”Perancangan Relational Database Jurusan Teknik Industri Universitas Katolik Widya Mandala Surabaya”. Laporan Penelitian Lembaga Penelitian dan Pengabdian Masyarakat-Universitas Katolik Widya Mandala Surabaya, Juni, 2005.
[2] Sianto, Martinus Edy, Dewi, D.R.S., Maukar, Anastasia Lidya : ”Implementasi Sistem Produksi Push Dan Pull Untuk Pengontrolan Lantai Produksi”. Laporan Penelitian Lembaga Penelitian dan Pengabdian Masyarakat-Universitas Katolik Widya Mandala Surabaya, Juli, 2006.
[3] Maukar, Anastasia Lidya: ”Identifikasi Aspek-Aspek Penunjang Kualitas Lulusan Jurusan Teknik Industri Universitas Katolik Widya Mandala Surabaya”. Laporan Penelitian Lembaga Penelitian dan Pengabdian Masyarakat-Universitas Katolik Widya Mandala Surabaya, Oktober, 2006.
[4] Hindarso H., dan Maukar, A.L., “Feasibility Study for Bio-gasoline Production from Used Cooking Oil and Bio-oil using Catalytic Cracking as Transportation Fuel, Lembaga Penelitian dan Pengabdian Masyarakat-Universitas Katolik Widya Mandala Surabaya Interdiciplinary Research Grant 2007.
[5] Hindarso,   H.,     Ismadji,   Suryadi   and   Maukar, Anastasia   Lidya,”Conversion   of     Biomass   to   Bio-fuel     as Alternative Fuel for Transportation and Industry using Silica and Alumina Catalysts”, Insentif Riset Dasar, Kementerian Negara Riset dan Teknologi, 2008
[6] Herman Hindarso, and Maukar, Anastasia Lidya, “Production of Liquid Fuel using Catalytic Upgrading of Bio-oil from Pyrolysis of Biomass”, Hibah Bersaing DIKTI, 2008 (first year)Herman Hindarso and   Maukar, Anastasia Lidya, “Production of Liquid Fuel using Catalytic Upgrading of Bio-oil from Pyrolysis of Biomass”, Hibah Bersaing DIKTI, 2009 (second year)
[7] Maukar, Anastasia   Lidya   and   Herman     Hindarso,”Production   of   Charcoal     from Pyrolysis of     Biomass”, Penelitian Dosen Muda DIKTI, 2008
[8] Maukar, Anastasia   Lidya and Herman   Hindarso, ”Production of   Biogasoline from Pyrolysis of Biomass”, Penelitian Dosen Muda DIKTI, 2009
[9] Maukar, Anastasia Lidya, Dewi, D.R.S., Rahaju, D.E.S.,   dan Sianto, Martinus Edy, “Pembuatan sumber pangan alternatif sebagai bahan baku pembuatan bakpao di UKM kedungdoro-surabaya (Studi Alternatif     Pengganti   Tepung   Terigu     dengan   Menggunakan   Tepung     Suweg)”,   LPPM   Unika Widya Mandala Surabaya, 2009
[10] Maukar, Anastasia Lidya, Dewi, D.R.S., “Studi Simulasi Penentuan Jumlah Kebutuhan dan Utilisasi Dari Kontainer Sebagai Returnable Transport Packaging”, LPPM Unika Widya Mandala Surabaya, 2010
[11] Maukar, Anastasia Lidya , Agustine, Cynthia, “The Analysis of Customer Satisfaction Towards Service Quality (A Case Study at Coffee Toffee Mega Bekasi)”, Lembaga Riset dan Pengabdian Masyarakat Universitas Presiden, 2013
[12] Maukar, Anastasia Lidya, Handiyatmoro, Sesar, “Application of Rank Positional Weight Method at Television Tube Production to Increase Line Efficiency”,Lembaga Riset dan Pengabdian Masyarakat Universitas Presiden, 2013
[13] Maukar, Anastasia Lidya , Desfiasri, Ririn, “Analisis Peningkatan Kapasitas Produksi Assembly Line LED Downlight di PT. DEF”,   Lembaga Riset dan Pengabdian Masyarakat Universitas Presiden, 2015
[14] Maukar, Anastasia Lidya, Andira, Widodo, Aris, “ Peningkatan Efisiensi Produksi Produk Housing 441”, Lembaga Riset dan Pengabdian Masyarakat Universitas Presiden, 2015
[15] Andira,Maukar, Anastasia Lidya , Rahadiansyah, M.S., “Pemanfaatan Exhaust Air Compressor Dijadikan Alternatif untuk Menjalankan Mesin Tampo Print”, Lembaga Riset dan Pengabdian Masyarakat Universitas Presiden, 2015

Research Interests
1. Facility Layout
2. Information System Analysis and Design
3. Statistics Application in Marketing Researchm Design of Experiment, and Forecasting
4. Scheduling and Inventory Management

Teaching Interests
1. Facility Planning
2. Industrial Statistics
3. Production Planning and Inventory Control
4. Database design
5. Information System Analysis and Design

Achievements

August 2000-September 2001 STUNED (Study Netherlands) Scholarship for Master Degree
2007 LPPM Universitas Katolik Widya Mandala Surabaya- Interdiciplinary Research Grant “Feasibility Study for Bio-gasoline Production from Used Cooking Oil and Bio-oil using Catalytic Cracking as Transportation Fuel”. Associate with Herman Hindarso.
2008 Penelitian Dosen Muda DIKTI Maukar,”Production   of     Charcoal   from Pyrolysis   of   Biomass”, Associate with Herman Hindarso.
2008 Insentif Riset Dasar, Kementerian Negara Riset dan Teknologi.,”Conversion   of     Biomass   to   Bio-fuel     as Alternative Fuel for Transportation and Industry using Silica and Alumina Catalysts. Assosiate with Herman Hindarso and Suryadi Ismadji
2008 (first year)2009 (second year) Hibah Bersaing DIKTI .“Production of Liquid Fuel using Catalytic Upgrading of Bio-oil from Pyrolysis of Biomass”. Associate with Herman Hindarso
2009 Penelitian Dosen Muda DIKTI. ”Production of Biogasoline   from Pyrolysis of Biomass”. Associate with Herman Hindarso
26th October – 6th November 2009 STUNED Refresher Course Scholarship

Hobbies
Cooking; Traveling; and Craft

Leave a Reply

Your email address will not be published. Required fields are marked *